Products
FINISH
PRODUCT DESCRIPTION
KKS® TILEBOND C2-SP is two components, cement-polymer based, ready-mixed tile adhesive.
This product meets the technical requirements of C2 class cementitious tile adhesive mortar - high-grade cementitious tile adhesive mortar according to TCVN 7899-1:2008 (or ISO 13007: 2004).
ADVANTAGE
• Resistant to water pressure.
• High adhesive strength.
• Increased polymer helps to minimize peeling and problems in application.
• Long-time workability, which allows adjustment after applying.
• Modified cement-polymer based tile adhesive mortar, with economic efficiency
USES
• Used for mosaic tiles.
• Used for area such as: swimming pool, spa, sauna.
APPLICATION
SURFACE PREPARATION
Concrete surface must be clean, sound, level and uncontaminated by oil or grease. Absorbent substrates must be pre-wetted to saturated surface dry condition.
MIXING
A(Liquid)/ B(Powder)=1/3(by weight)
A set of 20kg includes 5kg/pail of part A(Liquid) and 15kg/bag of part B(powder)
Mixing the product by trowel until the mixture is consistency. In larger quantities, use the low speed mixer.
COVERAGE
About 3.0 – 4.5 kg/m2/3mm
APPLYING
Using specialized towel to apply a thin coat, then apply the bond with suitable thickness, normally from 2 mm to 4mm.
The consumption depends on the surface roughness and the roughness of substrate as well as on the size of the tiles and the placing technique (simple placing or back-buttering).
CLEANING
Clean tools and equipment immediately after finishing work and before the material becomes harden with clean water.
LIMITATION
In the high heat of application condition, it is necessary to water the surface to reduce the heat prior to the application in order to avoid peeling phenomenon.
PRODUCT AND TECHNICAL DATA
|
Form |
Part A: modified polymer emulsion Part B: Cement mixture with selected aggregates |
|
Color |
Part A: Milky white liquid Part B: Grey powder |
|
Packaging |
20 kg/set (A+B) Part A: 5 kg Part B: 15 kg |
|
Density |
> 1.50 kg/ltr |
|
Coverage |
≈ 3.0 – 4.5 kg/m2 (based on 3mm mortar thickness) |
|
Adhesion strength in standard condition (after 28 days) |
≥ 1.0 N/mm2 (TCVN 7899-2:2008) |
|
Adhesion strength after water immersion (at 28 days age) |
≥ 1.0 N/mm2 (TCVN 7899-2:2008) |
|
Adhesion strength after heat aging (at 28 days age) |
≥ 1.0 N/mm2 (TCVN 7899-2:2008) |
|
Initial setting time |
> 180 minutes |
|
Pot life |
45 minutes (65% r.H, at 27oC) |
|
Adjustment allowance time |
20 minutes |
|
Waiting time before grouting |
7 - 8 hours (Depending on temperature) 24 hours (For Floor) Open to full traffic after 14 days |
|
Application temperature |
8 - 40oC |
STORAGE / SHELF LIFE
KKS® TILEBOND C2-SP must be stored in dry, covered place. Unpacked, undamaged packaging has 9 months of shelf life.
SAFETY INFORMATION
KKS® TILEBOND C2-SP contains cement which can cause skin irritation. Wear eye protection and respirator. The product is not dangerous when transported. Non-toxic, non-flammable. Dispose of in accordance with local regulations. For more information, please refer to the latest Product Safety Data Sheet.
