Products
FINISH
PRODUCT DESCRIPTION
KKS® TILEBOND C1 is one component, cement-polymer based, ready-mixed tile adhesive. It complies with type C1 of TCVN 7899-1:2008 (or ISO 13007-1: 2004).
ADVANTAGE
• Factory mixed - consistent quality.
• Only requires addition of water, time-saving.
• Do not need to soak brick before application.
• Tiles can be adjusted up to 30 minutes after application.
• Good bonding, no shrinkage.
• Anti-slipping when installing the vertical.
• Non-toxic, can be used for ponds.
USE
• Can be used for both porous tiles and non-porous tiles.
• To tile the floor, rooftop, terrace.
• Grouting the decorative tiles and heat-insulating panels.
• It can be used on horizontal and vertical applications.
APPLICATION
SURFACE PREPARATION
Concrete surface must be clean, sound, leveling and uncontaminated by oil or grease. Absorbent substrates must be pre-wetted to saturated surface dry condition.
MIXING
The mixing ratio is about 25% compare to the amount of mortar.
Mixing the product by trowel until the mixture is consistency. In larger quantities, use the low speed mixer.
COVERAGE
About 2.5 - 3.0 kg/m2/2mm
APPLYING
Using specialized towel to apply a thin coat, then apply the bond with suitable thickness, normally from 2 mm to 4mm.
The consumption depends on the surface roughness and the roughness of substrate as well as on the size of the tiles and the placing technique (simple placing or back-buttering).
CURING
Rapid drying out due to strong sunlight or wind must be avoided. Dampened concrete surface regularly in the first 7 days.
CLEANING
Clean tools and equipment immediately after finishing work and before the material becomes harden with clean water.
PRODUCT AND TECHNICAL DATA
|
Form |
A mixture of cement - polymer with selective aggregates and additives |
|
Color |
Grey powder |
|
Packaging |
25 kg/bag |
|
Density |
≈ 1.65 kg/l (bulk density of powder) ≈ 1.84 kg/l (density of fresh mortar) |
|
Mixing ratio |
Water/ Powder = 25% (part by weight) |
|
Consumption |
1 bag yields approx. 14.5 litters of mortar 69 bags (25kg) for 1m3 of mortar |
|
Coverage |
≈ 7-8 m2 per 25kg bag (based on 2mm mortar thickness) |
|
Compressive strength |
> 15 N/mm2 (after 28 days) |
|
Adhesive strength |
> 0.5 N/mm2 (after 28 days) |
|
Initial setting time |
> 180 minutes |
|
Pot life |
60 minutes (65% r.H, at 27oC) |
|
Adjustment allowance time |
30 minutes |
|
Waiting time before grouting |
7 - 8 hours (for wall, depend on temperature) 24 hours (for floor) Open to full traffic after 14 days |
|
Moisture resistance |
Very good |
|
Mould resistance |
Very good |
|
Oil and solvent resistance |
Good |
|
Acid and alkalis resistance |
Average |
|
Deform ability |
No deform |
|
Application temperature |
8 - 40oC |
STORAGE / SHELF LIFE
KKS® TILEBOND C1 must be stored in dry, covered place. Unpacked, undamaged packaging has 9 months of shelf life.
SAFETY INFORMATION
KKS® TILEBOND C1 contains cement which can cause skin irritation. Wear eye protection and respirator. The product is not dangerous when transported. Non-toxic, non-flammable. Dispose of in accordance with local regulations. For more information, please refer to the latest Product Safety Data Sheet.
