PRODUCT DESCRIPTION and USAGE
KKS® Mould 835W is a form release agent in emulsion type. 
It supports the removal of steel, aluminum and wooden formworks.
ADVANTAGE
•    Easy to apply
•    Usable for different type of moulds
•    Make fair surface of finished concrete
•    Significantly reduced the pitting on finished concrete’s surface
•    Involved tools can be cleaned by water
•    Economic solution
APPLICATION
SURFACE PREPARATION
All surfaces to be applied with KKS® Mould 835W need to be cleaned and free from grease and old concrete.
APPLICATION
Apply a thin layer evenly over the surface of formwork by brush, roller or spray equipment. 
CLEANING
Clean tools and equipment with clean water immediately after application.
REMARK
Protect the KKS® Mould 835W from being wetted and sprayed
Clean off the formworks surfaces after each use and before the application is strongly recommended to avoid the buildup of harden concrete.
TECHNICAL DATA

PACKAGING
5 litter/can or 25 litter/can
STORAGE / SHELF LIFE
KKS® Mould 835W has at least 12 months of shelf life if store in properly in unopened and undamaged packaging.
SAFETY INFORMATION
KKS® Mould 835W can cause allergy, so avoid direct contact with skin. Should wear protective clothing (gloves, glasses) when using the product. The product is not dangerous when transported. Dispose of in accordance with local regulations. For more information please refer to the latest Product Safety Data Sheet.