PRODUCT DESCRIPTION and USAGE
KKS® Mould 830 is a form release agent. 
It supports the removal of steel, aluminum and wooden formworks.
ADVANTAGE
•    Easy to apply
•    Usable for different type of moulds
•    Make fair surface of finished concrete
•    Significantly reduced the pitting on finished concrete’s surface
•    No staining
•    Economic solution
•    Can also be applied for formwork used in steam curing process, as well as on damp shuttering.
APPLICATION
SURFACE PREPARATION
All surfaces to be applied with KKS® Mould 830 need to be cleaned and free from grease and old concrete.
APPLICATION
Apply a thin layer evenly over the surface of formwork by brush, roller or spray equipment. 
CLEANING
Clean tools and equipment with clean water immediately after application.
REMARK
Protect the KKS® Mould 830 from being wetted and sprayed
KKS® Mould 830, once dried, is weather resistance. No risk of slipping when wet with rain.
Cleaning the mould surface between each use and before applying is essential to prevent the formation of hardened concrete.
TECHNICAL DATA

STORAGE / SHELF LIFE
KKS® Mould 830 has at least 24 months of shelf life if store in properly in unopened and undamaged packaging.
SAFETY INFORMATION
KKS® Mould 830 can cause allergy, so avoid direct contact with skin. Should wear protective clothing (gloves, glasses) when using the product. The product is not dangerous when transported. Dispose of in accordance with local regulations. For more information please refer to the latest Product Safety Data Sheet.