DESCRIPTION
KKS® WATERPLUG 302 is ready-mixed compound, one component, and rapid setting to plug active water leaks.
ADVANTAGE
•    Prevent water and water force high.
•    Easy to use, just add water to apply
•    Can mix by hand, no specialize tools require.
•    Setting and developing strength rapid
•    Bonding well, no crack, no shrinkage
•    Not contain chloride, abrasion resistance.
USE    
KKS® WARTERPLUG 302 is used to prevent immediate leakage of water with or without pressure through cracks, cliffs, concrete, reinforced concrete, bolts, etc. in structures such as:
•    Basement, subway
•    Hydroelectric dam
•    Sewer systems, water tanks, water lines
•    Cliffs, tunnels through the mountains
APPLICATION
Perforate the concrete or rock as “V” shape around the leak. Cleaning broken debris, impurities and surface cleaning with water prior to application KKS® WARTERPLUG 302.
Filling KKS® WARTERPLUG 302 has recently been blended into a "V" perforated, starting from the outside and gradually into the center of leakage (to prevent leaks, small water). Hold the material in place and then scrub the KKS® WARTERPLUG 302 residues externally
If the water pressure is too high, use a wooden button to insert it first, then use KKS® WARTERPLUG 302 to fill and protect.
NOTICE
Mix KKS® WARTERPLUG 302 in small quantities for each mixing. If mixed in large quantities, the product may be frozen before use.
Do not mix KKS® WARTERPLUG 302 with other additives, sand or cement.
CLEANNING OF TOOLS
Tools and equipments should be cleaned immediately with water. Hardened and/or cured material can only be mechanically removed.
PRODUCT DATA

STORAGE / SHELF LIFE
KKS® WARTERPLUG 302 must be stored in a dry, covered place. has to be in dry, cool, shaded place. If stored properly in original unopened packaging, it’s available for 6 months.
SAFETY INFOMATION
KKS® WARTERPLUG 302 can cause irritation to the skin, eyes and skin allergies. When splashed in the eyes or on skin, wash immediately with plenty of water and seek medical advice if necessary. Gloves, mask, goggles should always be worn. Product is non-hazardous in transportation. Disposal should be done according to local law. For more information, please refer to the latest Product Safety Data Sheet.