DESCRIPTION
KKS® CRETESEAL C is a liquid admixture that acts as a waterproofing agent combined with superplasticization ability to help the concrete achieves high level of impermeability. 
KKS® CRETESEAL C complies with ASTM C494 standard, type A.
ADVANTAGES
KKS® CRETESEAL C offers the following advantages:
•    Reduced shrinkage
•    Increased waterproofing properties 
•    Increases adhesion
•    Increased workability without increasing water content
•    Easily compacted to increase the strength of concrete and smooth finishing surface
•    Increase the intensity and longevity of concrete
KKS® CRETESEAL C does not contain both chlorides and other corrosive substances and therefore it can be used without restriction for reinforced concrete and pre-stressed concrete structures.
APPLICATION    
KKS® CRETESEAL C is mainly suitable for the production of concrete in ready-mix concrete plants and in construction sites.
•    Water tank, pool
•    Floor foundations, underground construction.
•    Sewage treatment system.
•    Dams and reservoirs.
•    Canal
And where waterproofing concrete is required.

INSTRUCTION FOR USE
DOSAGE
0.3 –  0.5 liter/ 100 kg of cement
COMPATIBILITY
KKS® CRETESEAL C can be used in combination with all KKS concrete admixtures but must be added to the concrete mixture separately and not mixed together before insertion.
KKS® CRETESEAL C is compatible with all types of Portland cement including sulfate resisting Portland cement.
CONSUMPTION/MIXING
KKS® CRETESEAL C is possible to mix with water that has been measured for the concrete before adding it to the dry concrete mixture or adding it separately into the fresh concrete mixture. 
For optimum drainage efficiency, we recommend the mixing time is at least 1 minute. 
When adding the remaining water of the batch to adjust the viscosity of the concrete should be done after a minimum of 2/3 of the wet mixing time to avoid excess water in the concrete.
CONCRETE WORK
Using KKS® CRETESEAL C can produce the highest quality concrete, but the processes of concrete technology such as mixing, pouring, vibrating and maintenance must be adhered to and applied.
NOTES ON APPLICATION / LIMITATION
It is recommended to carry out the test mix to select the correct dose rate to meet specific requirements. Please contact KKS Technical Department for further instructions.
CURING 
Effective concrete maintenance measures should be done.

PRODUCT DATA

STORAGE/ SHELF LIFE
KKS® CRETESEAL C has to be stored in dry, cool, shaded place. If stored properly in unopened, original packaging, it can be available for 12 months.
SAFETY INFORMATION 
KKS® CRETESEAL C may cause allergy, and should not be in direct contact with skin. When splashed in the eyes or on skin, wash immediately with plenty of water and seek medical advice if necessary. Product is non-toxic, non-flammable and non-hazardous in transportation. Disposal should be done according to local law. For more information, please refer to the latest Product Safety Data Sheet.