DESCRIPTION
KKS® ULTRA HARDENER is massively solid floor hardening pre-mixed powder designed to be applied as a dry shake over a freshly floated concrete floor or floor screed. The product is based on selected hard wearing metallic aggregates blended with certain alkali and hydraulic binders to increase hardness, abrasion resistance and aesthetic.
ADVANTAGE
•    Pre-mixed and ready-to-use powder; easy application; high and consistent quality.
•    Improves resistance to abrasion.
•    Inhibits surface dust.
•    Enhances resistance to impact.
•    Improves resistance to oils and greases.
USE
KKS® ULTRA HARDENER creates a hard surface to resist substrate abrasion. Suitable uses for floors suffered serious mechanical abrasion and demand the construction of a special hard coating as:
•    Warehouses, basements.
•    Mechanical workshops
•    Parking areas
•    Garage and service stations.
•    Aircrafts hangars
APPLICATION
SUBTRATES PREPARATION
The design and construction of the floor should be adequate to withstand the traffic, impact and such other loads the floor is likely to be exposed to. The vibrating beam and leveling work should be in right way to get optimum result. After the concrete separates water and before it is hardening, quickly flattening the substrate with machine.
PRODUCT AND TECHNICAL DATA

STORAGE/SHELFLIFE

KKS® ULTRA HARDENER must be stored in a dry, covered place. Under unopened and undamaged packaging condition, this product is available for 12 months.
SAFETY INFORMATION
KKS® ULTRA HARDENER is non-toxic but alkaline like normal cement and can cause irritation with sensitive skin. Gloves, mask, goggles should always be worn. Product is non-hazardous in transportation. Disposal should be done according to local law. For detailed Health, Safety and Environmental recommendations, please consult and follow all instructions on the product Material Safety Data Sheet.