SEALANT- BONDING
DESCRIPTION
KKS® FLEXICON 200 is 1-component elastic, high performance, polyurethane base sealant. This product is suitable for filling expansion joints.
ADVANTAGES
• One component, ready to use
• Effortless application
• Good adhesion to many types of surface
• Good movements capability
• High elasticity, high tear resistance
• Excellent aging resistance and weather-ability
USES
• Sealing joints in construction structures in general
• Sealing joints between door frame, window to wall
• Sealing expansion joint between different building materials.
• Fill the juxtapose area between the PVC and the structure
APPLICATION
SURFACE PREPARATION
The surface should be dry, clean, uniform, no grease and debris should be cleaned.
KKS® FLEXICON 200 is not adhesive on the glass. The adhesion to the surface should be checked prior to application.
APPLICATION METHOD
After suitable joint and substrate preparation, insert Backing Rod to required depth and apply primer if necessary. Insert sausage into sealant gun and firmly extrude KKS® FLEXICON 200 into joint making sure that it is full contact with the sides of the joint. Fill the joint, avoiding air entrapment. KKS® FLEXICON 200 must be tooled firmly against joint sides to ensure good adhesion.
Masking tape must be used where sharp exact joint lines or exceptionally neat lines are required. Remove the tape whilst the sealant is still soft. Sleek joint with smoothing liquid for a perfect sealant surface.
CLEANNING OF TOOLS
Clean all tools and application equipment immediately after use. Hardened material can only be mechanically removed.
NOTICE
Elastic sealants may not be over painted.
Color deviations may occur due to exposure to chemicals, high temperatures, UV-radiation. However, a change in color will not adversely influence the technical performance or the durability of the product.
Do not use KKS® FLEXICON 200 as a glass sealer, on bituminous substrates, natural rubber or on building materials which might bleed oils, plasticizers or solvents which could attack the sealant
Do not use to seal swimming pools.
Not suitable for joints with water pressure or permanent water immersion
PRODUCT DATA
Base |
1-part polyurethane base |
Color |
Grey |
Packaging |
600 ml/foil pack 20 foil pack/box |
Density |
≈ 1.15 ± 0.03 kg/liter |
Skinning time |
60 – 90 minutes (25oC) |
Shore A Hardness |
40 ± 5 (after 28 days) |
Elongation at Break |
500% |
Modulus of elasticity |
≥ 0.4 N/mm2 |
Tear Strength |
10 N/mm2 |
Joint Dimensions |
Min. width = 10mm Max. width = 35mm |
Sag - Flow |
0 mm – very good |
Application Temperature |
5oC - 35oC |
STORAGE / SHELF LIFE
KKS® FLEXICON 200 has to be stored in dry, cool, shaded place. If stored properly in unopened, original packaging, it has a shelf life of 12 months.
SAFETY INFORMATION
KKS® FLEXICON 200 may cause skin irritation and eye damage. Gloves, eyeglasses and respirators protection should be worn when using the product. When splashed in the eyes or on skin, wash immediately with plenty of water and seek medical advice if necessary. Product is non-dangerous in transportation. Disposal should be done according to local law. For more information, please refer to the latest Product Safety Data Sheet.